Services

Gravity to pressurised conversions

Low water pressure, weak showers, and taps that fade when someone opens another one are signs of a gravity-fed system. A pressurised system gives strong, even pressure at every tap and shower.

Unvented hot water cylinder with expansion vessel and new copper pipework

Why convert

In a gravity system, pressure comes from the height of the cold water tank in the attic. That is why water pressure is often low, showers are weak, and pressure falls away when more than one tap is running. See the before and after video.

A pressurised system pumps hot and cold water to every outlet. That means:

  • stronger showers
  • several taps and showers running at once
  • hot and cold at the same pressure, so showers are easy to balance

What’s involved

  1. Mains pressure and flow are checked first. The result decides what size pump you need.
  2. The cylinder is replaced. The vented cylinder comes out and an unvented cylinder is fitted.
  3. Pipework is altered to suit the new system.

Typical timeline

The timeline depends on the house and the amount of pipework involved. It is confirmed in your written quote, and the work is done on the agreed day.

Real job

Low pressure, before and after.

The same basin tap before and after. On the gravity-fed system only a trickle comes out. Here a pump was fitted to boost it; a gravity to pressurised conversion gives the same strong pressure at every tap and shower in the house.

See the difference

From gravity to pressurised.

Watch how the water moves around a house before and after a conversion. Use the buttons to switch between the two.

A house plumbed with a gravity system, then converted to a pressurised systemIn the gravity system, a black cold water tank in the attic feeds a green vented cylinder on the middle floor, and every tap and shower is fed by gravity, so water flows slowly. After the conversion, a blue tank with a built-in pump replaces the black tank and a silver unvented cylinder replaces the green one, so water reaches every tap and shower at strong, even pressure.AtticHot pressBathroomKitchenDownstairs WCMains inGravity tankVentedPumped tankUnvented

Gravity system: the black tank in the attic feeds the green vented cylinder and every tap by gravity alone. The pressure depends on the height of the tank, so showers and taps are often weak.

Pressurised system: a blue tank with a built-in pump replaces the gravity tank, and a silver unvented cylinder replaces the green one. Water reaches every tap and shower at strong, even pressure.

What's included

Every job, priced and agreed first.

  • A mains pressure and flow test before anything else
  • A written quote before work starts, with a fixed price for the work described
  • The cylinder, pump and pipework changes set out in your quote
  • The system filled, tested and checked for leaks
  • Tidy work

Our work

Jobs we have completed.

Old vented hot water cylinder with a shower pump and tangled pipework, before the conversion
Before
New unvented cylinder and expansion vessel with tidy copper pipework, after the conversion
After

FAQs

Common questions

Will a pressurised system work in my house?

Yes. Every house can work on a pressurised system. Whether it is a small, medium or large job depends on your current plumbing system, not on the size of the house.

Do I need a new hot water cylinder?

Yes. A standard cylinder is not built to hold high-pressure water, so an unvented cylinder is fitted. Ryan will confirm the size of the cylinder at the site visit.

Will my existing taps and showers still work?

Most will. Some older fittings, and showers made only for gravity systems, may need to be changed. These are checked at the site visit and listed in your quote.

How long does a conversion take?

It depends on the house and on how much pipework needs to change. The timeline is given in your written quote.

Do you work on gas boilers?

No. Oakview does not carry out gas or boiler work. A conversion covers the hot and cold water side of the system.

Call-out investigation fee €99 (excl. VAT)

Get a quote

Tell Ryan about the job and he will arrange a site visit and a written quote. Phone lines are open Mon–Fri 09:30–17:00.

Oakview covers Laois, Offaly, Kildare, South Dublin and Dún Laoghaire–Rathdown from Portarlington. See the areas we cover.

If we can fix the problem on the call-out with no materials ordered, all you pay is the €99 (excl. VAT). If not, we will give you a written quotation on the call-out.