Renewables

Heat pump hot water cylinders

Hot water heated by the air around it. A heat pump cylinder takes free heat from the air and uses a fraction of the electricity of an immersion.

The way of the future

Hot water from the air.

Most homes heat their water with an immersion or a boiler. A heat pump hot water cylinder does it differently. Instead of making heat, itmoves heat that is already in the air into your water, the same way a fridge moves heat out of its food, only in reverse.

Because it moves heat rather than making it, every unit of electricity it uses delivers around three units of heat into your water. That is why it costs far less to run.

Oakview mainly fits Ariston heat pump hot water cylinders. One replaces your existinghot water cylinder and immersion.

Illustration (AI-generated)

How it works

Four steps, all inside one cylinder.

  1. Air is drawn in

    A quiet fan pulls air across the heat pump on top of the cylinder.

  2. Heat is collected

    A refrigerant soaks up the heat in that air, even when the air feels cool.

  3. The compressor boosts it

    Squeezing the refrigerant raises its temperature well above the air it came from.

  4. Heat goes into the water

    A coil wrapped around the tank passes that heat into your water. Cooler air is blown back out.

How a heat pump hot water cylinder worksAir is drawn into the heat pump on top of the cylinder. Its heat is absorbed by refrigerant, the compressor raises the temperature, and a coil wrapped around the tank passes the heat into the water. Cooler air is blown out, and hot water leaves from the top of the tank.Air inCooler air outHot water outCold water inBackup immersion1234

Normal cylinder or heat pump cylinder

Same hot water. A third of the electricity.

For every unit of electricity it uses, here is how much heat each one puts into your water.

Normal cylinder with an immersion

1 unit of electricity in = 1 unit of heat

All the heat comes from electricity.

Heat pump cylinder

1 unit of electricity in = about 3 units of heat

The extra heat comes free from the air.

Based on manufacturer test figures (a COP of about 3.2 to 3.5 at 7°C air). Real results depend on the air temperature, how much hot water you use and where the cylinder is installed.

Lower bills

Up to 70 to 80% less electricity for hot water.

Heating water is one of the biggest energy costs in most homes. Ariston, the brand Oakview mainly fits, quotes savings of up to 70 to 80% on the electricity used to heat water, compared with a conventional electric water heater.

You can cut costs further by running it on night-rate electricity, or on spare power from solar panels.

Illustration (AI-generated)
The attic optionA hot press sits directly below the attic. Two ducts run from the heat pump cylinder up into the attic, kept well apart. One draws in the warmer attic air, and the other returns the cooled air to the attic.AtticOften warmer than outsideHot pressWarm air inCool air out

An Oakview option

The attic option.

A heat pump cylinder works best with warm air. If your hot press sits right below the attic, we can run the air intake and exhaust up into the attic, so it takes in warmer attic air instead of cold air from outside.

Warmer air in means the heat pump does less work, so it uses less electricity. The two ducts are kept well apart in the attic, so the cooled air never mixes back in, and none of it comes into your home.

Illustration (AI-generated)

Options

Built around your home.

  • The attic option

    If your hot press is right below the attic, we duct the air in and out of the attic for warmer air and less work for the heat pump.

  • Ducted to outside or another room

    The air can also be ducted to and from outside or a bigger room, so the cylinder fits in a small hot press.

  • Solar panels

    Some models can use spare electricity from solar PV panels to heat your water for free.

  • App and timer control

    Set it to run on cheaper night-rate electricity and control it from your phone on Wi-Fi models.

  • Backup immersion

    A built-in electric element keeps the hot water coming on the coldest days.

  • Sized to your home

    Cylinders come in different sizes. We size yours to the number of people and bathrooms.

FAQs

Common questions

Which brand do you fit?

Oakview mainly fits Ariston heat pump hot water cylinders.

Is a heat pump cylinder the same as a heat pump for my heating?

No. A heat pump cylinder only heats your hot water. It replaces your hot water cylinder and immersion, and your radiators and heating stay as they are.

How much can it save?

Ariston quotes savings of up to 70 to 80% on the electricity used to heat water, compared with a conventional electric water heater. Your savings depend on your hot water use, where the unit is installed and your electricity tariff.

Does it work in an Irish winter?

Yes. Modern units keep working in air as cold as -10°C, and a built-in backup immersion takes over if needed. The warmer the air it uses, the less electricity it needs, which is why the attic option can help.

Why use attic air?

An attic above a hot press is often warmer than the air outside, especially when the sun is on the roof. Warmer air means the heat pump does less work. Both ducts stay in the attic, kept apart, so the cooled air never comes back into your home.

Is it noisy?

It has a fan and compressor, so you will hear a gentle hum while it runs, a bit like a fridge. Ducting the air to the attic can also help keep the sound away from the house.

Is the quote free?

Yes. Quotes for a heat pump hot water cylinder are free.

Can it work with solar panels?

Yes, with the right model. Spare electricity from solar PV panels can be used to heat your water during the day.

Free quotes

Get a free quote for a heat pump cylinder

Tell Ryan about the job and he will arrange a site visit and a written quote. Phone lines are open Mon–Fri 09:30–17:00.

Oakview covers Laois, Offaly, Kildare, South Dublin and Dún Laoghaire–Rathdown from Portarlington. See the areas we cover.