Heating

Radiator repairs, replacement and fitting

Radiators not heating up now the heating is back on? Cold spots, leaks, noisy and stuck valves put right, and radiators, designer radiators and towel rails supplied, fitted, replaced and moved.

Collage of new column, vertical and panel radiators fitted by Oakview in one house

Oakview Plumbing and Bathrooms repairs, replaces and fits radiators across Dublin, Kildare, Laois and Offaly. If your radiators are not heating up now the heating is back on, are cold at the bottom, leaking or noisy, we find out why and put it right.

Radiators not heating up? Common problems and what fixes them

Radiators not heating up at all

If one radiator is cold, its thermostatic valve may be stuck closed or its lockshield valve shut. If they are all cold, the pump, a zone valve, the programmer or the boiler is usually the cause. We check each one in turn.

Cold at the bottom, warm at the top

Sludge has settled in the bottom of the radiator. A single radiator can be removed and flushed. If several are cold at the bottom, the whole system needs a power flush.

Cold at the top, warm at the bottom

Air is trapped at the top. Bleeding the radiator lets it out. If it keeps coming back, something is letting air into the system, and we find out what.

Cold in the middle, or patchy all over

Usually sludge built up through the radiator. Flushing clears it, or the radiator is replaced if it is badly corroded.

Not working after the summer

After months off, thermostatic valve pins and pumps can seize. We free them off, bleed the system and check the pressure, so the heating works when you need it.

Upstairs radiators not working

Air collects in the highest radiators, the pump may be too weak or set too low, or a zone valve may not be opening for upstairs.

Hot water working, radiators not

The boiler is fine, so the fault is on the heating side: a motorised zone valve, diverter valve, programmer, room thermostat or the pump.

Radiators hot when the heating is off

A motorised zone valve stuck open lets hot water go round the radiators when only the hot water is on. The valve or its head is replaced.

Leaking radiators and valves

Leaks at the valves and connections are fixed by repacking or replacing the valve, with the system drained down first so there is no risk of flooding. A radiator leaking from its body has rusted through and is replaced.

Banging, gurgling or whistling

Air in the system, a pump running too fast, sludge, or a valve only partly open. We bleed the system, set the pump, and clear or replace what is causing it.

New and replacement radiators

Radiators are replaced like for like, upgraded to a different size or style, moved to another wall, or added where a room has none. If a room never gets warm enough, a larger radiator or a designer radiator with a higher heat output often fixes it. See the bathroom radiator upgrade below.

We supply and fit panel, column, vertical and designer radiators, or fit radiators you have bought yourself. Towel radiators and towel rails are fitted in bathrooms, on their own or as part of a bathroom refit.

Radiator valves and thermostatic valves

Stuck, leaking or worn valves are repaired or replaced. Old valves can be upgraded to thermostatic radiator valves (TRVs), so you can set the temperature room by room and save heat in rooms you use less.

Get your radiators ready for winter

  • Bleed the radiators with the heating off and the radiators cool, starting downstairs and working up.
  • Check the pressure. On a pressurised (sealed) system, the gauge should read 1 to 1.5 bar when the heating is cold. Top it up if it is low. On an older gravity-fed system, with a tank in the attic, it will sit much lower, around 0.1 to 0.3 bar, and that is normal.
  • Turn the thermostatic valves fully up and down a few times to free the pins after the summer.
  • Feel each radiator once the heating has run for a while. Cold at the bottom means sludge, cold at the top means air.
  • Look under the valves for drips or stains on the floor.

If several radiators are cold at the bottom or slow to heat, the system usually needs a power flush rather than work on one radiator. If the pressure keeps dropping, there may be a leak or a failed expansion vessel.

Radiator repairs and replacement near you

We repair and replace radiators across South Dublin and Dún Laoghaire–Rathdown (including Tallaght, Clondalkin, Lucan, Dún Laoghaire, Blackrock and Dundrum), Kildare (Naas, Newbridge, Celbridge, Maynooth and Kildare town), Laois (Portarlington, Portlaoise and Mountmellick) and Offaly (Tullamore and Edenderry). Radiators run from oil boilers and electric boilers are all covered. See all the areas we cover.

If your radiators are not heating up, get a quote or call us and we will find the fault.

A bathroom that would not heat up

The customer's bathroom never got properly warm. The old radiator was simply too small to put out enough heat for the room.

We supplied and fitted a tall designer radiator to give the bathroom far more heat output, with new pipework to the valves. The heating was drained down first, and filled and tested once the new radiator was in.

See the time-lapse videos below

Real job

Watch a bathroom radiator upgrade.

The bathroom radiator was not giving out enough heat to warm the room, so we supplied and fitted a larger designer radiator. Step by step, the heating system is drained down, the new radiator made up, the old radiator removed, the level lines and bracket positions marked, the holes drilled, the brackets secured, the radiator hung and piped in, and the system filled and tested.

What's included

Every job, priced and agreed first.

  • A written quote before work starts, with a fixed price for the work described
  • The radiators and valves set out in your quote
  • The system refilled, bled and checked for leaks
  • Tidy work

Our work

Jobs we have completed.

FAQs

Common questions

Why are my radiators not heating up?

The most common causes are air in the radiators, sludge in the system, low system pressure, a stuck thermostatic valve, or a pump or zone valve that is not working. If only one radiator is cold, the fault is usually with that radiator or its valves. If they are all cold, it is usually the pump, the boiler or a valve on the system.

Why are my radiators not heating up after the summer?

After months off, pumps and valves can stick and thermostatic valve pins can seize in the closed position. Air can also collect in the system. Freeing the valve pins, bleeding the radiators and checking the pump usually brings them back.

Why is my radiator cold at the bottom but warm at the top?

Usually because sludge has settled in the bottom of the radiator. A single radiator can be taken off and flushed out. If several are cold at the bottom, the whole system needs a power flush.

Why is my radiator cold at the top?

Usually because air is trapped in it. Bleeding the radiator lets the air out. If it keeps coming back, there may be a leak or a fault letting air into the system.

My radiator is still not heating up after bleeding it. Why?

The valve may be stuck closed, the lockshield valve may be shut, the system may be blocked with sludge, or the pressure may have dropped after bleeding. On a pressurised system, check the gauge reads 1 to 1.5 bar when cold, and top it up if it is low.

Why are my upstairs radiators not working?

Usually air in the system, which collects in the highest radiators, a pump that is too weak or set too low, or a zone valve that is not opening for the upstairs.

The hot water works but the radiators do not. What is wrong?

The boiler is working, so the fault is on the heating side. Often a motorised zone valve, a diverter valve, the programmer or room thermostat, or the pump.

Why are my radiators hot when the heating is off?

Usually a motorised zone valve stuck open, so hot water meant for the cylinder is also going round the radiators.

Why is my radiator leaking?

Most leaks are at the valves or their connections, where a washer or olive has worn, and are fixed by repacking or replacing the valve. A leak from the body of the radiator usually means it has rusted through from the inside and needs replacing.

Why are my radiators banging or making noise?

Banging and gurgling are usually air in the system or a pump running too fast. Kettling, a rumbling or banging from the boiler side, can mean a build-up of sludge or limescale. Whistling is often a valve that is only partly open.

Do you bleed radiators with the heating on or off?

With the heating off and the radiators cool. Hot water can spray out, and the pump can pull air in while it runs. On a pressurised system, top the pressure back up to 1 to 1.5 bar afterwards.

How much does it cost to replace a radiator?

It depends on the radiator, its size and whether the pipework needs to change. You get a written quote with a fixed price before any work starts. Radiator faults start with a €99 (excl. VAT) call-out investigation fee. If we fix it on the call-out with no materials ordered, that is all you pay. See our price guide.

Can you replace a radiator valve without draining the system?

We always drain down before removing a valve. On a pressurised system it has to be done. On an older gravity-fed system a valve can technically be changed live, but if anything goes wrong the water has nowhere to go but your floor. Draining down first is the proper way to do it, and it means no risk of flooding your home.

Can you move a radiator to another wall?

Yes. The pipework is altered to suit, and the work is set out in your quote.

My bathroom never gets warm. Will a bigger radiator help?

Often, yes. If the radiator is too small for the room, a larger one or a designer radiator with a higher heat output puts out more heat. We check the room and the system first, so you know it will make a difference.

Do you supply and fit designer radiators?

Yes. Designer, column and vertical radiators are supplied and fitted, or fitted if you have bought your own.

Do you fit towel radiators?

Yes. Towel radiators and towel rails are supplied and fitted, on their own or as part of a bathroom refit.

Should I have my radiators checked before winter?

It is a good idea. Bleeding the radiators, freeing the valves and checking the pressure before the cold weather catches small problems before the heating is needed most.

Do you work on underfloor heating too?

Yes. Underfloor heating is repaired, serviced, flushed and fitted. See underfloor heating.

Where do you repair and replace radiators?

Across Dublin (South Dublin and Dún Laoghaire–Rathdown), Kildare, Laois and Offaly, from our base in Portarlington. See the areas we cover.

Call-out investigation fee €99 (excl. VAT)

Get a quote

Tell Ryan about the job and he will arrange a site visit and a written quote. Phone lines are open Mon–Fri 09:30–17:00.

Oakview covers Laois, Offaly, Kildare, South Dublin and Dún Laoghaire–Rathdown from Portarlington. See the areas we cover.

If we can fix the problem on the call-out with no materials ordered, all you pay is the €99 (excl. VAT). If not, we will give you a written quotation on the call-out.