Expansion vessels
Expansion vessels checked, recharged and replaced, on sealed heating systems and unvented hot water cylinders.

What an expansion vessel does
Water expands when it is heated. In a sealed heating system, including underfloor heating, or an unvented hot water cylinder, an expansion vessel takes up that extra volume and keeps the pressure steady.
When it fails
A vessel can lose its air charge, or the diaphragm inside can fail. The pressure then swings as the system heats and cools, and the pressure relief valve may start to drip.
A vessel that has lost its charge is recharged. One that has failed is replaced.
Internal and external vessels
Many boilers have a small expansion vessel built in, usually only 5 to 8 litres. Depending on the size of the radiators, that is normally enough for only one or two radiators. Most apartments and houses in Ireland have more than that.
That is why an external expansion vessel of 35 litres or more is commonly fitted. It covers every radiator in the property, so if the vessel inside the boiler fails, it is not a problem. We fit an external vessel and make sure you do not get expansion problems in the future.
What's included
Every job, priced and agreed first.
- A written quote before work starts, with a fixed price for the work described
- The vessel checked, and recharged or replaced as set out in your quote
- System pressure set, tested and checked for leaks
- Tidy work
FAQs
Common questions
What does an expansion vessel do?
Water expands as it heats. The vessel gives that extra volume somewhere to go, which keeps the pressure in the system steady.
How do I know mine has failed?
Pressure that swings up and down as the system heats and cools, or a relief valve that keeps dripping, are the usual signs.
Can a vessel be recharged, or does it need replacing?
If the vessel has only lost its air charge, it can be recharged. If the diaphragm inside has failed, the vessel is replaced.
The expansion vessel inside my gas boiler has failed. Can you help?
Yes. Oakview does not carry out gas work, so we do not work inside the boiler. Instead we fit an external expansion vessel, usually 35 litres or more, which covers the whole heating system and stops expansion problems in future.
Why fit an external expansion vessel?
The vessel built into a boiler is usually only 5 to 8 litres. Depending on the size of the radiators, that is normally enough for only one or two radiators. Most homes in Ireland have more, so an external vessel of 35 litres or more is commonly fitted to cover them all.
Call-out investigation fee €99 (excl. VAT)
Get a quote
Tell Ryan about the job and he will arrange a site visit and a written quote. Phone lines are open Mon–Fri 09:30–17:00.
Oakview covers Laois, Offaly, Kildare, South Dublin and Dún Laoghaire–Rathdown from Portarlington. See the areas we cover.
If we can fix the problem on the call-out with no materials ordered, all you pay is the €99 (excl. VAT). If not, we will give you a written quotation on the call-out.


